A Medlin Yard Ramp Alternative

Here at The YARD RAMP Site, we want you to know there is a Medlin Yard Ramp Alternative. We believe our products outrank our competitors by far. So here we will set apart the differences between our Yard ramps and Medlin’s Yard Ramps. 

No. 1:  A longer level off on The YARD RAMP Site vs. Medlin yard ramps

• The YARD RAMP Site Level Off  – 8 Foot level off – Standard on all yard ramps. 
• Medlin Level Off- 6 Foot level off – Standard on all yard ramps.

When operators are loading or product materials employing a ramp without a level could be detrimental if the operators’ vision is limited. Putting them at risk of having to look upwards or around especially with high loads until their lift is horizontal on its dock surface. The advantage of our 8 Foot level off allows the operator to have a straightforward viewing of the dock surface during all times of the loading procedure. 

No. 2:  More stable and easier to raise/lower over Medlin yard ramps

• The YARD RAMP Site –  Single-acting hydraulic hand pump – Standard on all yard ramps.
• Medlin- 2-speed manual crank system – Standard on all yard ramps.

We think most would agree that hydraulic will be an overall operator-friendly over manual any day. The advantage of our single-acting hydraulic pump design simply put is half of the effort is needed to raise the ramp. Resulting in a faster raise time, which will result in faster productivity time. Additionally, The Yard Ramp Site’s pump is located to protect it from dirt and debris and damage which makes any maintenance that might be needed easier. 

No. 3:  Longer lasting solid tires than a Medlin yard ramps

• The YARD RAMP Site – 18-Inch Solid/Pneumatic Tires – Standard on all yard ramps.
• Medlin – 4 Iron Core Poly Wheels – Standard on all yard ramps.

The solid/pneumatic tires are standard on all The YARD RAMP Site mobile yard ramps and offer high performance and versatility. Providing a strong grip including uneven surfaces and rough terrain. These tires can be used on either paved and non-paved surfaces. Making these the number one choice for construction sites, lumber yards, and indoor/outdoor warehouses. Pneumatic tires are made of solid rubber and do not require air to fill. They are puncture-proof, maintenance-free, and have lubricated-for-life bearings. Additionally, the tire will remain inflated no matter the weight that is applied to them. And last but not least, they absorb any shock loads from impact and cushion the load.  

The iron core poly wheel is a thick polyurethane thread that is chemically bonded to a heavy steel core. 12-inch seems to be the highest size available, however, they do not include the size of their tires on its website.  Alternatively, they do offer off-road wheels for use on non-paved surfaces. 

No. 4:  Improved safety compared to Medlin yard ramps

• The YARD RAMP Site – 15 Inch Lip – Standard on all yard ramps.
• Medlin – Unfortunately we could not locate this information on their website.

The Yard Ramp Site’s yard ramps come with a 15-inch lip that is designed to firmly rest on truck carrier body, dock floor, or platform. Additionally, our ramps come equipped with 8-foot long safety chains to assist in keeping the ramp from pulling away from its surface. 

No. 5:  Even more enhanced features; low end-plates, smooth side plates, sturdier deck grating, higher curbs, and more.

• The YARD RAMP Site – Low-End Plate – Standard on all yard ramps.
• Medlin – Level Off – Standard on all yard ramps.

Our beveled low-end plate eliminates bumps and jolts for forklifts entering or exiting the ramp. 

• The YARD RAMP Site – Smooth Side Plates – Standard on all yard ramps.
• Medlin – Welded side curbs – Standard on all yard ramps.

With The Yard Ramp Site’s smooth side plates all working components are enclosed, protecting them from possible damage from other equipment.  

• The Yard Ramp Site – 1-¾ inch Apart Steel Deck Grating – Standard on all yard ramps.
• Medlin- Steel Deck Grating – Standard on all yard ramps.

High-strength steel comes standard on all our yard ramps. Bar spacing is 1-¾ inch apart to allow debris, snow, and rain to fall through. Therefore ensuring all-weather, high-traction running surface. 

Medlin yard ramps have a serrated grating surface, with a heavy-duty carbon steel channel framing. Also, provide a diamond plate surface to allow a smooth transition from ground to container.

• The YARD RAMP Site – Safety Curbs – Standard on all yard ramps.
• Medlin – Safety Curbs – Offered

A 7-inch high curb is standard on all our yard ramps, preventing any accidental runoff with a patented box frame. 

Medlin offers extended curbs for variation for abnormal wheel height. 

• The YARD RAMP Site – Positioning Sleeve – Standard on all yard ramps. 
• Medlin – Unfortunately we could not locate this information on their website.

With our yard ramps the rotation occurs on the positioning sleeve instead of at the ramp connection, reducing wear on the ramp structure.   

• The YARD RAMP Site – Towbar – Offered/Optional 
• Medlin – Unfortunately we could not locate this information on their website.

The YARD RAMP Site offers a towbar on both steel and aluminum mobile yard ramps. This attaches to the lower end of the loading ramp, allowing the ramp to be towed for a short distance.

• The YARD RAMP Site – Steel Yard Ramps – Standard on all yard ramps.
• Medlin – Steel Yard Ramps – Standard on all yard ramps. 

The YARD RAMP Site offers Big Steel Yard Ramps for heavy loads. Made from A572-50 high-strength steel with a 50,000-pound minimum yield. Capacities range from 16,000 bs. – 60,000 lbs. And two standard widths of 70 or 84 inches and height adjustments of 38 to 65 inches. 

Medlin’s specs are Capacities of 16,000 – 30,000 lbs. Useable width of 64 – 78 inches. Useable length of 30 feet. 

• The YARD RAMP Site – Centrally Located Cylinder – Standard on all yard ramps.
• Medlin – Unfortunately we could not locate this information on the website.

Our yard ramps have a centrally located cylinder, therefore less chance of tipping. 

So although The YARD RAMP Site and Medlin yard ramps do have a few similarities, as you can see our yard ramps have many more included standard options available. This is why we stand out from our competitors. 

The YARD RAMP Site quality is unsurpassed.  Manufactured in the USA by experienced machinists, certified welders, and automated robotic cells, our ramps are designed for durability and built to last.

If your facility is need of investing or renting new or used dock to ground or mobile and portable yard ramps, call The YARD RAMP Site today at 1-888-612-1209.